|Shimano UN55 BB Square Taper Bottom Bracket |
The Shimano BB-UN54/55 Square Taper bicycle bottom bracket gives you reliable strength for square tapered cranksets.
|Lizard Skins Adhesive Protectors |
By: Lizard Skins
Protect your frame from nicks and scratches using Adhesive Protectors.â€¢ 3 Extenders included for desired protectionâ€¢ Small Measurements: 222mm x 32mmâ€¢ Large Measurements: 305mm x 64mmâ€¢ 14mm Thickâ€¢ Made in USABrand: Lizard Skins
|Lizard Skins Chainstay Protector |
By: Lizard Skins
Ride with minimal chain slap by using a Chainstay Protector. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993. SharkSkin neoprene offers critical frame protection, damping and a non-slip texture New sizing system for 26, 27.5, and 29 inch wheeled frames 280 mm in length. Size medium is 27 grams and fits a circumference...
|Shimano Ultegra Di2 EW-SD50 Electric Wire |
Check the size chart on this page for length, and dont worry about the rest. If youre running Ultegra 6770 or 6870, or Dura-Ace 9070, this E-Tube Di2 Wire will connect up all the moving parts. Its connectors are the same, regardless of application, so all you have to do is choose the length thats best suited.
| ||Shimano BBR60 Ultegra BSA Bottom Bracket |
|Shimano BB-UN26 Square taper Bottom Bracket |
Shimano UN26 bottom bracket features a plastic left hand cup. Sealed bearings and high quality spindle make it last for years and its maintenance free.
|SRAM GXP Team Bottom Bracket |
The SRAM GXP Team Bottom Bracket features Gutter Seal Technology to reduce friction and weight for smooth-spinning performance. Brand specific, this bottom bracket can only be installed with SRAM and Truvativ cranksets, due to its left side bearing, which uses a smaller diameter to fit with the stepped spindle of SRAMs cranks. Note that this bottom bracket is compatible with all SRAM road and Truvativ mountain cranksets, and it comes with English threading only. It fits 68 and 73mm bottom bracket shells, with included spacers for fitment with...
|Park Tool 16-Notch Bottom Bracket Tool |
By: Pro-motion Distributing - Direct
|Park Tool Press Fit Removal Tool for Internal Bottom Bracket Bearings |
By: Park Tool Price: $43.16
The Park Tool BBT-90.3 PressFit Bottom Bracket Bearing Tool Set is designed for installation and removal of the bearings and bearing units used in BB90, BB92, Shimano Press-Fit, SRAM Press-Fit GXP, Race Face Press-Fit and other press-fit bottom bracket systems. Includes bearing removal tool and two bushings, which when used in conjunction with the Park Tool Bearing Cup Press, will press the bearings into the frame. Bearing remover slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer Two...
|NGK (7839) DR7EA Standard Spark Plug, Pack of 1 |
By: Ngk Price: $1.68
Stens 130-149 NGK DR7EA Spark Plug